UVDTF Cup Wrap Application


Application Instructions for UV-DTF

  • Make sure your glass cup is clean (or any other surface) you are applying the transfer to and DRY. (We recommend wiping down with a clean microfiber towel and some water)
  • Before removing backing, scrape/press the design with a squeegee to ensure the entire design transfers to the clear film correctly.
  • Peel the transfer off the backing, starting with the corner
  • Line the transfer onto your glass cup (or surface) to your liking, REMEMBER the adhesive is extremely strong. This means once the transfer sticks it is almost impossible to take off.
  • Once design is placed, use a squeegee over the entire design to push any air bubbles out.
  • Heavily rub the entire design a few times to ensure everything is adhered correctly.
  • Slowly peel the clear film off and you're done!